Purchasing a used vehicle can be a good decision, only if you can complement the buy with proper research and check. The ultimate goal is to buy a used car that is comfortable, safe and most importantly, reliable.
How To – Test Drive A Used Car
To check the reliability of the car, you must ensure that you have to test drive the car. It is actually one of the most vital steps in the process.
The test drive reveals a lot about the car and it can help you decide whether or not the vehicle should be purchased.
What does the test drive tell you?
A test drive on varying speed and difficult road conditions would give you an idea about how the car would feel while driving around.
The acceleration and deceleration, the turns and the multiple braking situations would give you a picture of what driving the car would feel like.
How to proceed with the test drive?
The process actually begins when you sit inside the vehicle and start familiarising yourself with the controls. Without starting the vehicle, you should put the ignition to the accessory position.
This would illuminate all the dash warning lights, along with the check engine light. The problems might be many, starting from a minor problem with the light to grievous problems which are being tried to be hidden by tampering the display.
What should you look for during Test Drive?
You should be wary of all the different noises like knocking, tapping, squealing or others. you should check out the instrument panel to check for warning lights if there be any.
Try honking the horn, check if the gauges are working and get familiar with the accessories.
The heater and the air-conditioning blower fan should be tested on all speeds. Check out the different modes and ensure that the noise level is acceptable. The windshield wipers should also be tested, both the front and the rear, spraying the washer fluid.
Steering, Clutch & Brake Pads
Move on the steering wheel next and check for discrepancies and weird sounds without shifting the gear. Check out the break and clutch pedals. With the parking brake, you should shift the vehicle into gear.
The parking brake does not allow the vehicle to move. Check out the different gears, switch to the reverse and vice versa to make sure that there is no weird clunking noise.
The transmission should be normal without any grinding noise. It should be smooth and there should not be any trouble with power transmission.
You should keep a light hand on the steering and determine if the vehicle has a pull towards the left or right and even take your hands off the wheel to check this when safe to do so.
You should try driving over uneven roads or even speed bumps and also check out if there is any sound. This would show how the vehicle would respond in such a situation.
Thus, in short, a proper test drive would give you a detailed overview of how the car would perform in a particular condition.
On top of that, you would know if there is any problem with the car. It would help you develop the instinct if the used car would be a good fit for you.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count: